Amkus

  • Amkus 240SS Super SIMO

    Amkus 240SS SUPER SIMO
    • Electric Power Unit, 240 volt single phase power
    • Provides performance virtually the same as the AMKUS Ultimate system.
    • Two tools can be connected and operated simultaneously
    • Can be used with hose lengths up to 200’
    • Complete on-board circuit panel for: individual motor and circuit activation, LED circuit status display, LCD display for operational diagnostics, integrated low oil warning and low oil shutdown
    • Uses AMKUS Non-toxic mineral base hydraulic fluid
    • Optional wireless remote control with emergency shut down
  • Amkus AMK-20, AMK-30, AMK-40, AMK-60 Rams

    Amkus AMK-20, AMK-30, AMK-40, AMK-60 Rams
    • Unique base design distributes load
    • Check valve design maintains load
    • Push/pull design allows use of AMK-30CX chain package
    • Accessories available for increased capabilities
    • Anodized for corrosion protection
  • Amkus AMK-22 Cutter

    Amkus AMK-22 Cutter
    • SE Certified Model NFPA 1936, 2015 edition
    • CE EN 13204 Designation: AC127F-20.9
    • Designed to handle the advanced high strength steels in new model vehicles, not just NFPA
    • Boron
    • Martensite
    • Ultra High Strength Steels
    • Over 200,000 lbs of cutting force
  • Amkus AMK-24 Spreader

    Amkus AMK-24 Spreader
    • SE Certified Model NFPA 1936, 2015 edition
    • CE EN 13204 Designation: AS33/609-17.0
    • Unique construction allows maximum usable force
    • Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
    • Removable tips to accept chain package and optional tips for versatility
    • Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)
    • Control valve placement provides compact design allowing greater access for the user
    • Excellent balance and natural hand placement
    • Anodized for corrosion protection
  • Amkus AMK-25 Heavy Duty Cutter

    Amkus AMK-25 Heavy Duty Cutter
    • Extremely compact, powerful and versatile
    • Proven design - thousands in use worldwide
    • Capable of automotive cutting requirements
    • Anodized for corrosion protection
    • Available with D-ring handle
    • Convert to a Special Application Cutter with Genuine AMKUS Blades
  • Amkus AMK-30CRT Spreader

    Amkus AMK-30CRT Spreader
    • Unique construction allows maximum usable force
    • Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
    • Removable tips to accept chain package and optional tips for versatility
    • Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)
  • Amkus C15 - Combination Tool

    Amkus C15 - Combination Tool
    • Combination cutting/spreading/pulling tool
    • Well balanced and easy to use
    • Check valve design maintains load
    • Anodized for corrosion protection
    • Equipped with D-ring handle
  • Amkus EF2S

    Amkus EF2S
    • CE Certified Model NFPA 1936, 2015 edition
    • Electric powered, 3.0 H.P., Washdown motor
    • Two high pressure, 2-stage pumping systems
    • Two 2-way, 2-position selector valves
    • Two tools can be connected and operated simultaneously
    • Non-toxic mineral based hydraulic fluid
    • 220/240 volt single phase
  • Amkus GH2A-MCH Mini

    GH2A-MCH Mini
    • SE Certified Model NFPA 1936, 2015 edition
    • CE EN 13204 Designation: ATO
    • Gasoline powered 4 cycle Honda® engine
    • Uses lead free gasoline
    • High pressure, 2-stage pumping system
    • 4-way, 3-position selector valve
    • Two tools can be connected simultaneously
    • Alternate tool operation
    • Non-toxic mineral based hydraulic fluid
    • Includes spark arresting muffler
    • Easy access drain port to drain hydraulic fluid from pump
    • Carrying Handle
    • Optional Quick Connect Coupling
  • Amkus GH2B-MCH Mini Power Unit

    GH2B-MCH Mini Power Unit
    • Certified Compliant to NFPA 1936, 2015 Edition
    • Gas powered Honda® engine
    • Two tool simultaneous operation
    • Increased first stage pressure reduces cycle times
    • "BOOST" mode. When in alternate tool operation, increases tool speed in both pump stages
    • Newly designed 3-position control valves
    • Direct mounted Standard Couplings or single connection Mono Couplings
    • Modular design reduces time required for service
  • Amkus GH2S2 – XL

    GH2S2 – XL
    • SE Certified Model NFPA 1936, 2015 edition
    • CE EN 13204 Designation: MTO
    • Gasoline powered Honda ® 4 cycle engine
    • Uses lead free gasoline
    • Two high pressure, 2-stage pumping systems
    • Two 2-way, 2-position selector valves
    • Two tools can be connected and operated simultaneously
    • Non-toxic mineral based hydraulic fluid
    • Roll cage for protection and one hose loop for storage
    • Also available with carrying handle
  • Amkus ION iC550 Cutter

    ION iC550 Cutter
    • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
    • Short length of tool allows it to fit into confined spaces competitive tools can’t access.
    • High capacity, single stage pumps reduce total cutting time.
  • Amkus ION iCT516 Combi Tool

    ION iCT516 Combi Tool
    • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
    • Audible change in operation indicates when the battery is low and the tool will not suddenly stop operating due to a low battery without warning.
    • Available quick-connect extensions allow for a total extended length of more than 50 inches in a small, lightweight package.
  • Amkus ION iS240 Spreader

    ION iS240 Spreader
    • Lightweight aluminum enclosure is not susceptible to cracking like plastic housings.
    • Short length of tool allows it to fit into confined spaces competitive tools can’t access.
    • Audible change in operation indicates when the battery is low.
    • Spreader uses the same tips as the AMK-24 & AMK-30CRT, including the ERT tips and quick adjust chain package.
  • Amkus Ion ITR230 RAM

    Amkus Ion ITR230 RAM
    • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
    • Audible change in operation indicates when the battery is low and the tool will not suddenly stop operating due to a low battery without warning.
    • Available quick-connect extensions allow for a total extended length of more than 50 inches in a small, lightweight package.
  • Amkus Rescue Struts

    Amkus Rescue Struts
    • 6000 lb Hydraulic Lifting Capacity At Full Extension
    • Easy to Adjust Inner Extension Tubes
    • Large And Balanced Carrying Handle
    • Large Anchor Attachment Ring
    • Multiple Attachment Options In Offset Area
    • Large Assortment Of Accessories Available