Cutters Edge Multi Cut Chain Saw

More Power…More Torque and More Fuel Efficient - This new technology utilizes Dual Intakes that split the airflow into one fresh-air stream and one clean-air stream for the fuel-air mixture.

Cutters Edge H2 Rotary Chain Saw

This rotary rescue saw using new X TORQ® technology utilizes Dual Intakes that splits the airflow into one fresh-air stream and one clean-air stream for the fuel-air mixture.

MatJack High Pressure Air Bags

MatJack high pressure air lifting bag require only 1" clearance and can lift up to 86 tons with the touch of a button.

MatJack Low Pressure Air Bags

MatJack low pressure lifting cushions require only 1-3”/ 25-75mm clearance and can lift tons of weight with as little as 2psi/ .14bar.

Amkus Ion ITR230 RAM
  • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
  • Audible change in operation indicates when the battery is low and the tool will not suddenly stop operating due to a low battery without warning.
  • Available quick-connect extensions allow for a total extended length of more than 50 inches in a small, lightweight package.

ION iCT516 Combi Tool
  • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
  • Audible change in operation indicates when the battery is low and the tool will not suddenly stop operating due to a low battery without warning.
  • Available quick-connect extensions allow for a total extended length of more than 50 inches in a small, lightweight package.

ION iS240 Spreader
  • Lightweight aluminum enclosure is not susceptible to cracking like plastic housings.
  • Short length of tool allows it to fit into confined spaces competitive tools can’t access.
  • Audible change in operation indicates when the battery is low.
  • Spreader uses the same tips as the AMK-24 & AMK-30CRT, including the ERT tips and quick adjust chain package.

ION iC550 Cutter
  • Lightweight, solid aluminum housing is not susceptible to cracking like plastic housings on other tools.
  • Short length of tool allows it to fit into confined spaces competitive tools can’t access.
  • High capacity, single stage pumps reduce total cutting time.

GH2B-MCH Mini Power Unit
  • Certified Compliant to NFPA 1936, 2015 Edition
  • Gas powered Honda® engine
  • Two tool simultaneous operation
  • Increased first stage pressure reduces cycle times
  • "BOOST" mode. When in alternate tool operation, increases tool speed in both pump stages
  • Newly designed 3-position control valves
  • Direct mounted Standard Couplings or single connection Mono Couplings
  • Modular design reduces time required for service

GH2A-MCH Mini
  • SE Certified Model NFPA 1936, 2015 edition
  • CE EN 13204 Designation: ATO
  • Gasoline powered 4 cycle Honda® engine
  • Uses lead free gasoline
  • High pressure, 2-stage pumping system
  • 4-way, 3-position selector valve
  • Two tools can be connected simultaneously
  • Alternate tool operation
  • Non-toxic mineral based hydraulic fluid
  • Includes spark arresting muffler
  • Easy access drain port to drain hydraulic fluid from pump
  • Carrying Handle
  • Optional Quick Connect Coupling

GH2S2 – XL
  • SE Certified Model NFPA 1936, 2015 edition
  • CE EN 13204 Designation: MTO
  • Gasoline powered Honda ® 4 cycle engine
  • Uses lead free gasoline
  • Two high pressure, 2-stage pumping systems
  • Two 2-way, 2-position selector valves
  • Two tools can be connected and operated simultaneously
  • Non-toxic mineral based hydraulic fluid
  • Roll cage for protection and one hose loop for storage
  • Also available with carrying handle

Amkus EF2S
  • CE Certified Model NFPA 1936, 2015 edition
  • Electric powered, 3.0 H.P., Washdown motor
  • Two high pressure, 2-stage pumping systems
  • Two 2-way, 2-position selector valves
  • Two tools can be connected and operated simultaneously
  • Non-toxic mineral based hydraulic fluid
  • 220/240 volt single phase

Amkus 240SS SUPER SIMO
  • Electric Power Unit, 240 volt single phase power
  • Provides performance virtually the same as the AMKUS Ultimate system.
  • Two tools can be connected and operated simultaneously
  • Can be used with hose lengths up to 200’
  • Complete on-board circuit panel for: individual motor and circuit activation, LED circuit status display, LCD display for operational diagnostics, integrated low oil warning and low oil shutdown
  • Uses AMKUS Non-toxic mineral base hydraulic fluid
  • Optional wireless remote control with emergency shut down

Amkus AMK-24 Spreader
  • SE Certified Model NFPA 1936, 2015 edition
  • CE EN 13204 Designation: AS33/609-17.0
  • Unique construction allows maximum usable force
  • Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
  • Removable tips to accept chain package and optional tips for versatility
  • Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)
  • Control valve placement provides compact design allowing greater access for the user
  • Excellent balance and natural hand placement
  • Anodized for corrosion protection

Amkus AMK-30CRT Spreader
  • Unique construction allows maximum usable force
  • Tips remain parallel to the cylinder throughout the spread allowing them to stay in contact with the material continuously for maximum spread (helps avoid piercing with the tips)
  • Removable tips to accept chain package and optional tips for versatility
  • Push button pins for easy removal of tips (eliminates possibility of losing pins in the field)

Amkus AMK-25 Heavy Duty Cutter
  • Extremely compact, powerful and versatile
  • Proven design - thousands in use worldwide
  • Capable of automotive cutting requirements
  • Anodized for corrosion protection
  • Available with D-ring handle
  • Convert to a Special Application Cutter with Genuine AMKUS Blades

Amkus AMK-22 Cutter
  • SE Certified Model NFPA 1936, 2015 edition
  • CE EN 13204 Designation: AC127F-20.9
  • Designed to handle the advanced high strength steels in new model vehicles, not just NFPA
  • Boron
  • Martensite
  • Ultra High Strength Steels
  • Over 200,000 lbs of cutting force

Amkus C15 - Combination Tool
  • Combination cutting/spreading/pulling tool
  • Well balanced and easy to use
  • Check valve design maintains load
  • Anodized for corrosion protection
  • Equipped with D-ring handle

Amkus AMK-20, AMK-30, AMK-40, AMK-60 Rams
  • Unique base design distributes load
  • Check valve design maintains load
  • Push/pull design allows use of AMK-30CX chain package
  • Accessories available for increased capabilities
  • Anodized for corrosion protection

Amkus Rescue Struts
  • 6000 lb Hydraulic Lifting Capacity At Full Extension
  • Easy to Adjust Inner Extension Tubes
  • Large And Balanced Carrying Handle
  • Large Anchor Attachment Ring
  • Multiple Attachment Options In Offset Area
  • Large Assortment Of Accessories Available